GE Datex-Ohmeda S/5 - Introduction

S/5 Extension Frame, F-EXT, Extension Module, E-EXT
1
Document no. M1125641-03
Introduction
The Extension Frame, F-EXT4 is designed for use with S/5 monitors and provides four additional
module slots, and allows the measuring modules to be placed near the patient. The Extension
Frame, F-EXT4 is connected to the monitor with the extension module, E-EXT. F-EXT takes up
one module slot in the F-CU8 frame.
NOTES:
• Do not use F-EXT with F-CU5/F-CU5P.
• Only one F-EXT4 can be connected to the monitor at a time.
• The following modules cannot be used in the F-EXT4
− Recorder Module, E-REC
− Memory Module, E-MEM
− Interface Module, E-INT
− Compact Airway Modules, E-Cxxxxx
• Do not use identical modules simultaneously in the extension frame and in the host
monitor.
• When the extension frame is used with the S/5 Anesthesia Monitor, the F-CU8 must be of
rev. 03 or later.
The service menu is described in a separate “Service Menu“ slot and the spare part lists in the
“AM, CCM Spare Parts” slot.