GE Datex-Ohmeda S/5 - Page 243

S/5
TM
8-Module Frame, F-CU8 -12
21
Document no. M1125635-05
To remove the metal top cover
1. Remove the Power Supply Unit from the frame
housing.
2. Remove the four screws from the top cover and
disconnect the two cables from the Power Supply
Board.
3. Lift the cover off.
To remove the Power Supply Board
1. Remove the top cover of the Power Supply Unit.
2. Disconnect the two cables from the Power Supply
Board.
3. Remove the three screws from the bottom of the
unit.
Cables