Introduction
• Appendix D, Tracking Tutorial for Operators, provides instructions for quickly setting up
tracking with the 7200 ACS, eliminating the need to read the step-by-step instructions in
Section 5.0 of the manual.
• Appendix E, 7200 Troubleshooting Guide, contains probable causes and corrective action for
troubleshooting the 7200 ACS.
• Appendix F, Site Acceptance Test Procedure, contains the final proof of acceptance procedure
for the antenna control system.
• Appendix G, Graphical Menu Tree, contains a graphical menu tree that depicts all menus and
parameters for the system.
1.4 Supplemental Literature on CD and Website
Related documentation that is highly specialized or infrequently used has been
included on an enclosed Compact Disc. This information is also maintained on the
General Dynamics SATCOM Technologies website at http://www.gdsatcom.com.
This manual and all its various appendices have also been included on the CD. In
addition, documentation for prior generation (legacy) systems is included.
TABLE 1-1 SUPPLEMENTAL DOCUMENTATION
Directory Contents
7200 O&M Manual
CG-1280 – All subdocuments
(Including vendor literature)
Protocol Documents
CG-6042 – RC M&C protocol document
CG-6045 – MT M&C protocol document
CG-6041 – GPIB protocol document
Firmware Upgrade Procedures
CG-1281 – VCPU Flash Firmware Upgrade
Procedure V4.x
CG-1295 – 72XX ACU Parameter Download/
Upload V4.3+
Factory Test Procedures Reports
CG-0281 – Factory Test Proc. – 7200 (VCPU)
CG-0282 – Factory Test Report – 7200 (VCPU)
CG-0283 – Factory Test Proc. – VCPU
CG-0284 – Factory Test Report – VCPU
7200 Legacy Product Documents
CG-1190 – 7200 w/7150 (NTAC 2000 Inverters)
CG-1210 – 7200 w/7134 (NTAC 2000 Inverters)
CG-1260 – 7200 w/7150 (GPD315 Inverters)
(non-VCPU 7200)
CG-5546 – Force CPU 30xxxx Firmware Upgrade
Procedure V3.x
1-2
To Next Page
Loading...
Need help?
General