SITE TEST PROCEDURE
F - 8
1.6 Manual Antenna Control Tests
1. From the Main menu, select Tracking functions... and then
Manual antenna control. _______(Check)
2. Jog AZ CCW and observe that Azimuth: CCW and
Speed: Track (low) are highlighted and that the AZ angle
decreases. _______(Check)
3. Jog AZ CW and observe that Azimuth: CW and
Speed: Track (low) are highlighted and that the AZ angle
increases. _______(Check)
4. Jog EL DOWN and observe that Elevation: Down and
Speed: Track (low) are highlighted and that the EL angle
decreases. _______(Check)
5. Jog EL UP and observe that Elevation: Up and
Speed: Track (low) are highlighted and that the EL angle
increases. _______(Check)
THREE AXIS SYSTEM
6. Jog POL and observe that Polarization: CCW is
highlighted and that the POL angle decreases. _______(Check)
7. Jog POL CW and observe that Polarization: CW is
highlighted and that the POL angle increases. _______(Check)
FOUR AXIS SYSTEM
8. Jog 4th Axis CCW and observe that Polarization: CCW is
highlighted and that the POL angle decreases. _______(Check)
9. Jog 4th Axis CW and observe that Polarization: CW is
highlighted and that the POL angle increases. _______(Check)
10. Hold the [SHIFT] key down and jog AZ CCW and observe that
Azimuth: CCW and Speed: Slew (high) are highlighted and
that the AZ angle decreases. _______(Check)
11. Hold the [SHIFT] key down and jog AZ CW and observe that
Azimuth: CW and Speed: Slew (high) are highlighted and
that the AZ angle increases. _______(Check)
To Next Page
Loading...
Need help?
General