TRACKING TUTORIAL
D-6
17. From the Main menu..., select Tracking functions..., Edit a new or existing
target....
18. Select a noninitialized item (represented as "------------") on the target selection
menu and press [ENTER].
19. The Edit target data screen will appear. This screen contains Target name and
Tracking mode parameters, and the submenu Edit target parameters....
20. Select Target name. The following prompt appears:
Arrow keys move around, change letters; up to 12 letters are allowed.
21. To create a target name, use the up and down arrow keys to scroll through the
character set consisting of the following:
A blank space
Uppercase alphabet letters
Lowercase alphabet letters
Digits 0 through 9
Special characters:!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
22. When the desired character is highlighted, press the right arrow key to move to
the next space (to create a target name of more than one letter). Pressing
[ENTER] will enter the target name as selected by the user. (It is often helpful
to use the satellite name as the target name.) Blank spaces may be included as
part of the target's name.
The target mode must now be set for the target named in the above steps. The
target parameters must also be edited. The target parameters made available for
editing will be determined by the tracking mode selected for the target. For most
systems, OPT will be the desired tracking mode.
23. Select Tracking mode. Using the up and down arrow keys, scroll through the
following choices for the tracking mode:
Unused
Star tracking
OPT
Intelsat 11-element
Move to longitude
Move to look angles
24. When the desired tracking mode is highlighted, press [ENTER].
25. To edit the target parameters, select Edit target parameters....
To Next Page
Loading...