Hioki 3153 - Page 203

190
_____________________________________________________________________________________________
10.3 RS-232C Command Reference
______________________________________________________________________________________________
Syntax
:INSulation:RUPPer <data>
<data>
ON/OFF
(Character data)
Function
Enables and disables the upper-limit value for insulation-resistance tests, in the READY state.
Example
Enables the upper-limit value for an insulation-resistance test.
Transmission :INSulation:RUPPer ON
Error
The execution of this command in a state other than the READY state or "test setting state"
causes an execution error.
Syntax
:INSulation:RUPPer?
Response
syntax
<data>
<data>
ON/OFF
(Character data)
Function
Queries the upper-limit value enablement for insulation-resistance tests.
Example
Queries the upper-limit value enablement for insulation-resistance tests.
Transmission :INSulation:RUPPer?
Response OFF
Syntax
:INSulation:TIMer <data>
<data>
ON/OFF
(Character data)
Function
Enables and disables the test time for insulation-resistance tests, in the READY state.
Example
Enables the test time for an insulation-resistance test.
Transmission :INSulation:TIMer ON
Error
The execution of this command in a state other than the READY state or "test setting state"
causes an execution error.
:INSulation:RUPPer
Enables and disables the upper-limit value for insulation-resistance tests.
:INSulation:RUPPer?
Queries the upper-limit value enablement for insulation-resistance tests.
:INSulation:TIMer
Enables and disables the test time for insulation-resistance tests.