5.5.1 "PASS" State 76
5.5.2 Screening in "PASS" State 78
5.5.3 "FAIL" State 79
5.5.4 Screening in "FAIL" State 81
5.6 Automatic Discharge Function 82
Chapter 6 Program Mode Testing Method 83
6.1 Program Mode Display 84
6.2 Displaying the "READY" State
86
6.2.1 Key-lock Function 87
6.3 Program Setting State 88
6.3.1 Examples of Settings 91
6.4 Program-File Loading 96
6.5 Starting a Test
97
6.5.1 Executing a Test 98
6.5.2 Screening in "TEST" State 99
6.6 PASS or FAIL Determination 100
6.6.1 "PASS" State 100
6.6.2 Screening in "PASS" State 101
6.6.3 "FAIL" State 102
6.6.4 Screening in "FAIL" State 104
6.7 Automatic Discharge Function 105
Chapter 7 Optional Functions 107
7.1 PASS Hold Function 110
7.2 FAIL Hold Function
111
7.3 Hold Function
112
7.4 Momentary Out
114
7.5 Double Action
115
7.6 FAIL Mode
116
7.7 Interface Command "START"
117
7.8 Inter-lock Function
118
7.9 Setting of an Output-Voltage Restricting Value
119
7.10 Insulation Resistance Test Measurement Range
120
7.11 Insulation Resistance Test Termination Mode Settings
121
7.12 Setting for Screening during the Ramp-Up Time
123
7.13 PC Interface
124
7.14 START Protection Function
125
7.15 TEST-Signal Output
126
7.16 Example of Optional Functions Use
127
To Next Page
Loading...
