4.12 Setting the Parameters for Controlling SPT Switchover
This section describes the applications of the PIM-SM SPT switchover and method of
configuring the PIM-SM SPT switchover.
4.13 Configuring PIM BFD
This section describes how to configure PIM BFD on a shared network segment.
4.14 Configuring PIM Silent
This section describes how to configure PIM silent to protect hosts against attacks.
4.15 Configuring Basic PIM-SSM Functions
This section describes how to configure basic PIM-SSM functions.
4.16 Maintaining PIM-SM
This section describes how to clear the statistics on PIM-SM, how to debug PIM-SM, and how
to monitor the running status of PIM-SM.
4.17 Configuration Examples
This section provides several configuration examples of PIM-SM.
4 PIM-SM Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
4-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2009-07-28)
To Next Page
Loading...
