EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
l Run the display pim bfd session [ interface interface-type interface-number | neighbor
neighbor-address ]
*
command to check the information about the PIM BFD session.
l Run the display pim control-message counters [ interface interface-type interface-
number ] [ message-type message-type ] command to check the number of sent and
received PIM control messages.
l Run the display pim interface [ interface-type interface-number | up | down ]
[ verbose ] command to check the PIM information on the interface.
l Run the display pim neighbor [ interface interface-type interface-number ] [ verbose ]
command to check the information about a PIM neighbor.
l Run the display pim routing-table [ group-address [ mask { group-mask-length | group-
mask } ] ] [ source-address [ mask { source-mask-length | source-mask } ] ] [ incoming-
interface { interface-type interface-number | register } ] [ outgoing-interface { include |
exclude | match } { interface-type interface-number | register | none } ] [ mode { dm |
sm | ssm } ] [ flags flag-value ] [ fsm ] command to check the PIM multicast routing table.
----End
4.16.3 Debugging PIM-SM
Context
CAUTION
Debugging affects the performance of the system. So, after debugging, run the undo debugging
all command to disable it immediately.
Procedure
l Run the debugging pim { all | event [ advanced-acl-number ] | routing-table [ advanced-
acl-number ] | neighbor [ basic-acl-number ] | assert [ advanced-acl-number ] | rp | join-
prune [ advanced-acl-number ] | register [ advanced-acl-number ] | msdp [ advanced-acl-
number ] | state-refresh [ advanced-acl-number ] } command to enable debugging of PIM-
SM.
----End
4.17 Configuration Examples
This section provides several configuration examples of PIM-SM.
4.17.1 Example for Configuring the PIM-SM Network
4.17.2 Example for Configuring SPT Switchover in PIM-SM Domain
4.17.3 Example for Configuring PIM BFD
4.17.1 Example for Configuring the PIM-SM Network
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast 4 PIM-SM Configuration
Issue 01 (2009-07-28) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-53

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals