EasyManuals Logo

Huawei Quidway S9300 Configuration Guide - Multicast

Huawei Quidway S9300
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
1.4.6 Checking the Configuration
Prerequisite
The configuration of static Layer 2 multicast for a VLAN is complete.
Procedure
l Run the display l2-multicast forwarding-table vlan vlan-id [ source-address source-
address ] group-address { group-address | router-group } command to check the
multicast forwarding table of a VLAN.
----End
Example
Run the display l2-multicast forwarding-table vlan 7 command, and you can view the
multicast forwarding table of VLAN 7.
<Quidway> display l2-multicast forwarding-table vlan 7
VLAN ID : 7, Forwarding Mode : IP
-----------------------------------------------------------------------
(Source, Group) Interface Out-Vlan
-----------------------------------------------------------------------
(1.1.1.1, 232.1.1.1) GigabitEthernet2/0/0 7
-----------------------------------------------------------------------
Total Group(s) : 1
1.5 Configuring Multicast VLAN Replication
This section describes how to configure the multicast VLAN replication function.
1.5.1 Establishing the Configuration Task
1.5.2 Creating a Multicast VLAN
1.5.3 Creating a User VLAN
1.5.4 Adding Interfaces to Corresponding VLANs
1.5.5 Checking the Configuration
1.5.1 Establishing the Configuration Task
Applicable Environment
By configuring multicast VLAN replication, you can manage and control the multicast source
and the multicast group members. In this manner, users in different VLANs can receive the same
multicast flow, and thus bandwidth is saved.
In the implementation of multicast VLAN replication, a VLAN is defined as a multicast VLAN
and the other VLANs are defined as user VLANs. A multicast VLAN is the VLAN that the
interface connecting the S9300 to the multicast source belongs to. The multicast VLAN
converges multicast flows. A user VLAN is the VLAN that interfaces connected to members of
a multicast group belong to. The user VLANs receive the data from the multicast VLAN.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast 1 Layer 2 Multicast Configuration
Issue 01 (2009-07-28) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1-7

Table of Contents

Other manuals for Huawei Quidway S9300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S9300 and is the answer not in the manual?

Huawei Quidway S9300 Specifications

General IconGeneral
BrandHuawei
ModelQuidway S9300
CategoryNetwork Router
LanguageEnglish

Related product manuals