Huawei Quidway S9300

To Next Page

To Previous Page

1 Layer 2 Multicast Configuration

About This Chapter

This chapter describes the procedures for configuring static Layer 2 multicast, multicast VLAN

replication, and IGMP snooping, and provides configuration examples.

1.1 Introduction to Layer 2 Multicast

This section describes the functions and advantages of Layer 2 multicast.

1.2 Layer 2 Multicast Features Supported by the S9300

This section describes the Layer 2 multicast features supported by the S9300.

1.3 Logical Relationships Between Configuration Tasks

This section describes the logical relationships between the configuration tasks.

1.4 Configuring Static Layer 2 Multicast

This section describes how to configure static multicast entries in a VLAN.

1.5 Configuring Multicast VLAN Replication

This section describes how to configure the multicast VLAN replication function.

1.6 Configuring IGMP Snooping

This section describes how to configure IGMP snooping in a VLAN.

1.7 Maintaining Layer 2 Multicast

This section describes how to clear the static entries in a multicast forwarding table.

1.8 Configuration examples

This section provides several configuration examples of Layer 2 multicast.

Quidway S9300 Terabit Routing Switch

Configuration Guide - Multicast 1 Layer 2 Multicast Configuration

Issue 01 (2009-07-28) Huawei Proprietary and Confidential

1-1

Other manuals for Huawei Quidway S9300