EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(*, 225.0.0.2) Ok No 1 1
(*, 225.0.0.3) Ok No 2 1
--------------------------------------------------------------------
Total Entry(s) : 3
<S9300> display l2-multicast forwarding-table vlan
VLAN ID : 3, Forwarding Mode : IP
-----------------------------------------------------------------------
(Source, Group) Interface Out-Vlan
-----------------------------------------------------------------------
(*, 225.0.0.1) GigabitEthernet1/0/2 100
(*, 225.0.0.1) GigabitEthernet1/0/3 200
(*, 225.0.0.2) GigabitEthernet1/0/2 100
(*, 225.0.0.2) GigabitEthernet1/0/3 200
(*, 225.0.0.3) GigabitEthernet1/0/2 100
(*, 225.0.0.3) GigabitEthernet1/0/3 200
-----------------------------------------------------------------------Total Entry
(s) : 6
----End
Configuration Files
l Configuration file of the S9300
#
sysname S9300
#
vlan batch 3 100 200
#
igmp-snooping enable
#
vlan 3
igmp-snooping enable
multicast-vlan enable
multicast-vlan user-vlan 100 200
vlan 100
igmp-snooping enable
vlan 200
igmp-snooping enable
#
interface GigabitEthernet1/0/2
port hybrid tagged vlan 100
l2-multicast static-group group-address 225.0.0.1 vlan 100
l2-multicast static-group group-address 225.0.0.2 vlan 100
l2-multicast static-group group-address 225.0.0.3 vlan 100
#
interface GigabitEthernet1/0/3
port hybrid tagged vlan 200
l2-multicast static-group group-address 225.0.0.1 vlan 200
l2-multicast static-group group-address 225.0.0.2 vlan 200
l2-multicast static-group group-address 225.0.0.3 vlan 200
#
interface GigabitEthernet3/0/1
port hybrid tagged vlan 3
#
return
1.8.3 Example for Configuring IGMP Snooping
Networking Requirements
As shown in Figure 1-4, GE 3/0/1 of the S9300 is connected to a router on the multicast source
side, and GE 1/0/1 is connected to a host. You are required to configure IGMP snooping to
ensure that three hosts in VLAN 3 can receive multicast data from multicast groups in the range
of 225.1.1.1 to 225.1.1.3 permanently.
1 Layer 2 Multicast Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
1-32 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2009-07-28)

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals