Chapter Description
2 IGMP Configuration Describes the procedure for configuring IGMP and the
commands for maintaining IGMP, and provides
configuration examples.
3 PIM-DM Configuration Describes the procedure for configuring PIM-DM and the
commands for maintaining PIM-DM, and provides
configuration examples.
4 PIM-SM Configuration Describes the procedure for configuring PIM-SM on and the
commands for maintaining PIM-SM, and provides
configuration examples.
5 MSDP Configuration Describes the procedure for configuring MSDP and the
commands for maintaining MSDP, and provides
configuration examples.
6 Multicast Route
Management
Describes the principle of RPF, procedures for configuring
multicast static routes and forwarding policies, and
commands for maintaining multicast static routes and
forwarding policies, and provides configuration examples.
Conventions
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Indicates a hazard with a high level of risk, which if not
avoided, will result in death or serious injury.
Indicates a hazard with a medium or low level of risk, which
if not avoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation, which if not
avoided, could result in equipment damage, data loss,
performance degradation, or unexpected results.
Indicates a tip that may help you solve a problem or save
time.
Provides additional information to emphasize or supplement
important points of the main text.
About This Document
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2009-07-28)
To Next Page
Loading...
Need help?
General
