#
interface GigabitEthernet1/0/0
port hybrid untagged vlan 103
#
interface GigabitEthernet2/0/0
port hybrid tagged vlan 600
#
interface GigabitEthernet3/0/0
port hybrid untagged vlan 104
#
ospf 1
area 0.0.0.0
network 192.168.6.0 0.0.0.255
network 10.110.3.0 0.0.0.255
network 10.110.4.0 0.0.0.255
#
return
5.9.3 Example for Configuring Anycast RP
Networking Requirements
As shown in Figure 5-3, a PIM-SM domain contains multiple multicast sources and receivers.
The MSDP peer relation needs to be set up in the PIM-SM domain to implement RP load
balancing.
Figure 5-3 Networking diagram for configuring anycast RP
Receiver
user2
Loopback10
Loopback0
Loopback0
Loopback10
GE2/0/0
GE3/0/0
S9300-C
S9300-D
S9300-E
PIM-SM
MSDP peers
Source
S
1
Loopback1
Loopback1
GE2/0/0
GE3/0/0
GE2/0/0
GE1/0/0
S9300-A
S9300-B
GE1/0/0
GE2/0/0
Receiver
user1
Source
S
2
GE1/0/0
GE2/0/0
GE1/0/0
GE1/0/0
Switch
Interface VLANIF interface IP address
S9300-A GE 1/0/0 VLANIF 105 10.110.5.1/24
GE 2/0/0 VLANIF 101 10.110.1.2/24
S9300-B GE 1/0/0 VLANIF 106 10.110.6.1/24
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast 5 MSDP Configuration
Issue 01 (2009-07-28) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-41
To Next Page
Loading...
