Huawei Quidway S9300 - Page 232

peer 192.168.1.1 connect-interface vlanif300
static-rpf-peer 192.168.1.1 rp-policy list-c
#
return
l Configuration file of S9300-F
#
sysname S9300-F
#
vlan batch 500 600
#
multicast routing-enable
#
interface vlanif 500
ip address 192.168.5.1 255.255.255.0
pim sm
pim bsr-boundary
#
interface vlanif 600
ip address 192.168.6.1 255.255.255.0
pim sm
#
interface GigabitEthernet1/0/0
port hybrid tagged vlan 500
#
interface GigabitEthernet2/0/0
port hybrid tagged vlan 600
#
interface LoopBack0
ip address 3.3.3.3 255.255.255.255
pim sm
#
ospf 1
area 0.0.0.0
network 192.168.5.0 0.0.0.255
network 192.168.6.0 0.0.0.255
network 3.3.3.3 0.0.0.0
#
pim
c-bsr LoopBack0
c-rp LoopBack0
#
ip ip-prefix list-c permit 192.168.0.0 16 greater-equal 16 less-equal 32
#
msdp
peer 192.168.4.1 connect-interface vlanif500
static-rpf-peer 192.168.4.1 rp-policy list-c
#
return
l Configuration file of S9300-G
#
sysname S9300-G
#
vlan batch 103 104 600
#
multicast routing-enable
#
interface vlanif 103
ip address 10.110.3.1 255.255.255.0
pim sm
#
interface vlanif 104
ip address 10.110.4.1 255.255.255.0
pim sm
igmp enable
#
interface vlanif 600
ip address 192.168.6.2 255.255.255.0
pim sm
5 MSDP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
5-40 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2009-07-28)