Huawei Quidway S9300 - 6.6 Configuring the FTP Download Test

#
interface vlanif 100
ip address 192.168.1.1 255.255.255.0
pim sm
#
interface vlanif 400
ip address 192.168.4.1 255.255.255.0
pim sm
#
interface GigabitEthernet1/0/0
port hybrid tagged vlan 100
#
interface GigabitEthernet2/0/0
port hybrid tagged vlan 400
#
interface LoopBack0
ip address 1.1.1.1 255.255.255.255
pim sm
#
ospf 1
area 0.0.0.0
network 192.168.1.0 0.0.0.255
network 192.168.4.0 0.0.0.255
network 1.1.1.1 0.0.0.0
#
pim
c-bsr LoopBack0
c-rp LoopBack0
#
ip ip-prefix list-df permit 192.168.0.0 16 greater-equal 16 less-equal 32
#
msdp
peer 192.168.3.2 connect-interface vlanif100
peer 192.168.5.1 connect-interface vlanif400
static-rpf-peer 192.168.3.2 rp-policy list-df
static-rpf-peer 192.168.5.1 rp-policy list-df
#
return
l Configuration file of S9300-D
#
sysname S9300-D
#
vlan batch 300
#
multicast routing-enable
#
interface vlanif 300
ip address 192.168.3.2 255.255.255.0
pim sm
#
interface GigabitEthernet1/0/0
port hybrid tagged vlan 300
#
interface LoopBack0
ip address 2.2.2.2 255.255.255.255
pim sm
#
ospf 1
area 0.0.0.0
network 192.168.3.0 0.0.0.255
network 2.2.2.2 0.0.0.0
#
pim
c-bsr LoopBack0
c-rp LoopBack0
#
ip ip-prefix list-c permit 192.168.0.0 16 greater-equal 16 less-equal 32
#
msdp
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast 5 MSDP Configuration
Issue 01 (2009-07-28) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-39