EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[S9300-C-Vlanif100] pim sm
[S9300-C-Vlanif100] quit
Step 3 Configure the static RP.
# Configure the static RP on S9300-A, S9300-B, and S9300-C. The configurations of S9300-B
and S9300-C are similar to configuration of S9300-A, and are not mentioned here.
[S9300-A] pim
[S9300-A-pim] static-rp 192.168.1.1
Step 4 Configure the threshold of the SPT switchover.
# Configure S9300-C to perform the SPT switchover when the transmission rate of multicast
packets reaches 1024 kbit/s.
[S9300-C] pim
[S9300-C-pim] spt-switch-threshold 1024
[S9300-C-pim] quit
Step 5 Verify the configuration.
# The multicast source begins to send data to the multicast group, and HostA can receive the
data from the source. When the rate is smaller than 1024 kbit/s, you can run the display pim
routing-table command to view the PIM multicast routing table on S9300-C. You can find that
the upstream neighbor is S9300-A. The displayed information is as follows:
<S9300-C> display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
RP: 192.168.1.1
Protocol: pim-sm, Flag: WC
UpTime: 00:13:46
Upstream interface: vlanif100
Upstream neighbor: 192.168.1.1
RPF neighbor: 192.168.1.1
Downstream interface(s) information:
Total number of downstreams: 1
1: vlanif102
Protocol: igmp, UpTime: 00:13:46, Expires:-
(10.110.5.100, 225.1.1.1)
RP: 192.168.1.1
Protocol: pim-sm, Flag: ACT
UpTime: 00:00:42
Upstream interface: vlanif100
Upstream neighbor: 192.168.1.1
RPF neighbor: 192.168.1.1
Downstream interface(s) information:
Total number of downstreams: 1
1: vlanif102
Protocol: pim-sm, UpTime: 00:00:42, Expires:-
# When the rate is higher than 1024 kbit/s, you can run the display pim routing-table command
to view the PIM multicast routing table on S9300-C. You can find that the upstream neighbor
is S9300-B. The displayed information is as follows:
<S9300-C> display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
RP: 192.168.1.1
Protocol: pim-sm, Flag: WC
UpTime: 00:13:46
Upstream interface: vlanif300,
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast 4 PIM-SM Configuration
Issue 01 (2009-07-28) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-65

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals