Huawei Quidway S9300

multicast routing-enable
#
interface vlanif 100
ip address 192.168.1.1 255.255.255.0
pim sm
#
interface vlanif 101
ip address 10.110.1.1 255.255.255.0
pim sm
#
interface vlanif 104
ip address 10.110.4.1 255.255.255.0
igmp enable
pim sm
#
interface GigabitEthernet1/0/0
port hybrid tagged vlan 100
#
interface GigabitEthernet2/0/0
port hybrid tagged vlan 101
#
interface GigabitEthernet3/0/0
port hybrid untagged vlan 104
#
interface LoopBack0
ip address 1.1.1.1 255.255.255.255
pim sm
#
interface LoopBack1
ip address 3.3.3.3 255.255.255.255
pim sm
#
interface LoopBack10
ip address 10.1.1.1 255.255.255.255
pim sm
#
ospf 1
area 0.0.0.0
network 10.110.1.0 0.0.0.255
network 10.110.4.0 0.0.0.255
network 1.1.1.1 0.0.0.0
network 3.3.3.3 0.0.0.0
network 10.1.1.1 0.0.0.0
network 192.168.1.0 0.0.0.255
#
pim
c-bsr LoopBack1
c-rp LoopBack10
#
msdp
originating-rp LoopBack0
peer 2.2.2.2 connect-interface LoopBack0
#
return
5 MSDP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
5-46 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2009-07-28)