EasyManua.ls Logo

Huawei Quidway S9300

Huawei Quidway S9300
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Step 2 Enable IGMP snooping.
Enable IGMP snooping globally and in VLAN 3.
[S9300] igmp-snooping enable
[S9300] vlan 3
[S9300-vlan3] igmp-snooping enable
[S9300-vlan3] quit
Step 3 Add interfaces to VLAN 3.
# Configure GE 1/0/1 on the S9300 to allow data frames from VLAN 3 to pass through.
[S9300] interface gigabitethernet 1/0/1
[S9300-GigabitEthernet1/0/1] port hybrid tagged vlan 3
[S9300-GigabitEthernet1/0/1] quit
# Configure GE 3/0/1 on the S9300 to allow data frames from VLAN 3 to pass through.
[S9300] interface gigabitethernet 3/0/1
[S9300-GigabitEthernet3/0/1] port hybrid tagged vlan 3
[S9300-GigabitEthernet3/0/1] quit
Step 4 Add GE 1/0/1 to the multicast group 225.0.0.1 statically.
[S9300] interface gigabitethernet 1/0/1
[S9300-GigabitEthernet1/0/1] l2-multicast static-group group-address 225.0.0.1
vlan 3
[S9300-GigabitEthernet1/0/1] quit
Step 5 Verify the configuration.
Run the display l2-multicast forwarding-table vlan command on the S9300. You can view
information about the outgoing interface of the multicast group 225.0.0.1.
<S9300> display l2-multicast forwarding-table vlan 3
VLAN ID : 3, Forwarding Mode : IP
-----------------------------------------------------------------------
(Source, Group) Interface Out-Vlan
-----------------------------------------------------------------------
(*, 225.0.0.1) Eth-Trunk1 3
-----------------------------------------------------------------------Total Entry
(s) : 1
The preceding output shows that VLAN3 is added to the multicast group 225.0.0.1 statically.
----End
Configuration Files
l Configuration file of the S9300
#
sysname S9300
#
vlan batch 3
#
igmp-snooping enable
#
vlan 3
igmp-snooping enable
#
interface GigabitEthernet1/0/1
port hybrid tagged vlan 3
l2-multicast static-group group-address 225.0.0.1 vlan 3
#
interface GigabitEthernet3/0/1
port hybrid tagged vlan 3
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast 1 Layer 2 Multicast Configuration
Issue 01 (2009-07-28) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1-29

Table of Contents

Other manuals for Huawei Quidway S9300

Related product manuals