Huawei Quidway S9300

[S9300-GigabitEthernet3/0/1] quit
[S9300] interface gigabitethernet 1/0/1
[S9300-GigabitEthernet1/0/1] port hybrid tagged vlan 10
[S9300-GigabitEthernet1/0/1] quit
Step 2 Enable IGMP snooping.
# Enable IGMP snooping globally.
[S9300] igmp-snooping enable
Enable IGMP Snooping in VLAN 3.
[S9300] vlan 3
[S9300-vlan3] igmp-snooping enable
[S9300-vlan3] quit
Step 3 Configure GE 3/0/1 as the static router interface of VLAN 3.
[S9300] interface gigabitethernet 3/0/1
[S9300-GigabitEthernet3/0/1] igmp-snooping static-router-port vlan 3
[S9300-GigabitEthernet3/0/1] quit
Step 4 Configure static multicast groups.
[S9300] interface gigabitethernet 1/0/1
[S9300-GigabitEthernet1/0/1] l2-multicast static-group group-address 225.1.1.1
vlan 3
[S9300-GigabitEthernet1/0/1] l2-multicast static-group group-address 225.1.1.2
vlan 3
[S9300-GigabitEthernet1/0/1] l2-multicast static-group group-address 225.1.1.3
vlan 3
[S9300-GigabitEthernet1/0/1] quit
Step 5 Verify the configuration.
# Check all configurations of IGMP snooping.
<S9300> display igmp-snooping vlan configuration
IGMP Snooping Configuration for VLAN 3
igmp-snooping enable
According to the preceding information, the IGMP snooping of the VLAN is enabled.
# Check the configuration of the static router interface.
Run the display igmp-snooping router-port vlan 3 command on the S9300.
<S9300> display igmp-snooping router-port vlan 3
Port Name UpTime Expires Flags
---------------------------------------------------------------------
VLAN 3, 1 router-port(s)
GE3/0/1 2d:10h 00:01:02 STATIC
According to the preceding information, GE 3/0/1 is configured as a static router interface.
# Verify the information about member interfaces of a static multicast group.
<S9300> display igmp-snooping port-info
VLAN 3, 3 Entry(s)
-----------------------------------------------------------------------
(Source, Group) Port Flag
-----------------------------------------------------------------------
(1.1.1.1,225.1.1.1) GE1/0/4
S--
1 port(s)
(1.1.1.1,225.1.1.2) GE1/0/4 S--
1 port(s)
(1.1.1.1,225.1.1.3) GE1/0/4 S--
1 port(s)
1 Layer 2 Multicast Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
1-34 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2009-07-28)