4 Sample Processing
301-7146 English Rev B 11/02/2011 Operator’s Manual NA 86
11. If samples were being processed, wait two (2) minutes to allow the instrument
to process the data.
12. Turn the power off by pressing the green
button located on the left side of the
chemistry system.
13. Open the Strip Provider Module; see
Accessing the Strip Provider Module.
14. Wear gloves to avoid contamination of
the strips while re-aligning the strips.
15. Close the Strip Provider Module; see
Accessing the Strip Provider Module
.
16. Close the door. Turn the power back on
by pressing the green button located on
the left side of the chemistry system.
To Next Page
Loading...