P
M
= 6 dBm
The calculated power margin is greater than zero, indicating that the link has sufficient
power for transmission. Also, the power margin value does not exceed the maximum
receiver input power. Refer to the specification for your receiver to find the maximum
receiver input power.
Related
Documentation
• Calculating the EX Series Switch Fiber-Optic Cable Power Budget on page 104
• Understanding EX Series Switches Fiber-Optic Cable Signal Loss, Attenuation, and
Dispersion on page 147
• Pluggable Transceivers Supported on EX Series Switches on page 133
107Copyright © 2017, Juniper Networks, Inc.
Chapter 7: Power Specifications and Requirements
To Next Page
Loading...
