Juniper EX4300 Hardware Guide

Parts Inventory (Packing List) for an EX4300 Switch
The switch shipment includes a packing list. Check the parts you receive with the switch
against the items on the packing list. The packing list specifies the part number and
provides a description of each part in your order. The parts shipped depend on the switch
model you order. See “EX4300 Switch Models” on page 15 for more information.
If any part on the packing list is missing, contact your customer service representative or
contact Juniper customer care from within the U.S. or Canada by telephone at
1-888-314-5822. For international-dial or direct-dial options in countries without toll-free
numbers, see http://www.juniper.net/support/requesting-support.html .
Table 86 on page 162 lists the parts and their quantities as in the standard packing list for
an EX4300 switch.
Table 86: Inventory of Components Provided with an EX4300 Switch
Quantity
Component
1Switch
2 preinstalledEX4300-24T, EX4300-24P,
EX4300-32F, EX4300-48T,
EX4300-48T-AFI, EX4300-48P,
EX4300-48T-DC, and
EX4300-48T-DC-AFI switches
Fan modules
Fan modules for this model are not shipped by default; you must
separately order either two AIR OUT (AFO) labelled or two AIR IN
(AFI) labelled fan modules.
EX4300-24T-S, EX4300-24P-S,
EX4300-32F-S, EX4300-48T-S, and
EX4300-48P-S switches
1 (AC or DC) preinstalledEX4300-24T, EX4300-24P,
EX4300-32F, EX4300-48T,
EX4300-48T-AFI, EX4300-48P,
EX4300-48T-DC, and
EX4300-48T-DC-AFI switches
Power supplies
Power supplies for this model are not shipped by default; you
must separately order either AC power supplies or DC power
supplies.
EX4300-24T-S, EX4300-24P-S,
EX4300-32F-S, EX4300-48T-S, and
EX4300-48P-S switches
1EX4300-24T, EX4300-24P,
EX4300-32F, EX4300-48T,
EX4300-48T-AFI, EX4300-48P,
EX4300-48T-DC, and
EX4300-48T-DC-AFI switches
AC power cord
appropriate for
your
geographical
location
AC power cord for these models is not shipped by default; you
must order it separately.
EX4300-24T-S, EX4300-24P-S,
EX4300-32F-S, EX4300-48T-S, and
EX4300-48P-S switches
•
Uplink module slot cover panel: 1
•
Power supply cover panel: 1
Cover panels for slots without preinstalled components
Copyright © 2017, Juniper Networks, Inc.162
EX4300 Switch Hardware Guide

Juniper EX4300 Specifications

General

Model	EX4300
Virtual Chassis	Yes, up to 10 members
Layer 3 Routing	Yes
10GBASE SFP+ Ports	4
Jumbo Frames	9216 bytes
MAC Address Table Size	32, 000
Operating System	Junos OS
Uplink Ports	4 x 10GBASE SFP+
Power Supply	AC or DC options
Operating Temperature	0°C to 45°C (32°F to 113°F)
Input Voltage	100-240V AC
Operating Relative Humidity	5 to 90% RH, non-condensing
Management Options	CLI, Web UI, Junos Space
Redundancy	Yes, power supply and fans
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Ports	24 or 48