Juniper EX4300 Hardware Guide

CHAPTER 4
Power Supplies
•
AC Power Supply in EX4300 Switches on page 49
•
AC Power Supply LEDs in EX4300 Switches on page 56
•
DC Power Supply in EX4300 Switches on page 57
•
DC Power Supply LEDs in EX4300 Switches on page 62
AC Power Supply in EX4300 Switches
The AC power supply in EX4300 switches is a hot-insertable and hot-removable
field-replaceable unit (FRU): You can install it without powering off the switch or
disrupting the switching function.
All the EX4300 switches that are powered by AC power supplies except EX4300-24T-S,
EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and EX4300-48P-S switches are
shipped with one AC power supply pre-installed in the rear panel of the switches.
EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and EX4300-48P-S
switches are not shipped with pre-installed power supplies; you must order them
separately.
This topic describes the AC power supplies.
CAUTION: Do not mix:
•
AC and DC power supplies in the same chassis
•
Power supplies with different airflow labels (AIR IN (AFI) and AIR OUT
(AFO)) in the same chassis.
•
Fan modules with different airflow labels (AIR IN (AFI) and AIR OUT (AFO))
in the same chassis.
•
Power supplies and fan modules with different airflow labels (AIR IN (AFI)
and AIR OUT (AFO)) in the same chassis.
This topic includes:
•
Characteristics of an AC Power Supply on page 50
•
AC Power Supply Airflow on page 51
49Copyright © 2017, Juniper Networks, Inc.

Juniper EX4300 Specifications

General

Model	EX4300
Virtual Chassis	Yes, up to 10 members
Layer 3 Routing	Yes
10GBASE SFP+ Ports	4
Jumbo Frames	9216 bytes
MAC Address Table Size	32, 000
Operating System	Junos OS
Uplink Ports	4 x 10GBASE SFP+
Power Supply	AC or DC options
Operating Temperature	0°C to 45°C (32°F to 113°F)
Input Voltage	100-240V AC
Operating Relative Humidity	5 to 90% RH, non-condensing
Management Options	CLI, Web UI, Junos Space
Redundancy	Yes, power supply and fans
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Ports	24 or 48