Table 86: Inventory of Components Provided with an EX4300 Switch (continued)
Quantity
Component
2Mounting brackets
8Mounting screws
4Rubber feet
1RJ-45 cable and RJ-45 to DB-9 serial port adapter
1Quick Start installation instructions
1Juniper Networks Product Warranty
1End User License Agreement
NOTE: You must provide the appropriate mounting screws for mounting the
switch on a rack or a cabinet.
Related
Documentation
EX4300 Switches Hardware Overview on page 3•
• Unpacking an EX4300 Switch on page 161
Registering Products—Mandatory for Validating SLAs
Register all new Juniper Networks hardware products and changes to an existing installed
product using the Juniper Networks website to activate your hardware replacement
service-level agreements (SLAs).
CAUTION: Register product serial numbers on the Juniper Networks website
and update the installation base data if there is any addition or change to
the installation base or if the installation base is moved. Juniper Networks
will not be held accountable for not meeting the hardware replacement
service-level agreement for products that do not have registered serial
numbers or accurate installation base data.
Register yourproduct(s) at:https://tools.juniper.net/svcreg/SRegSerialNum.jsp .
Update your install base at:
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp .
Related
Documentation
• Contacting Customer Support to Obtain Return Material Authorization on page 262
• Contacting Customer Support to Obtain a Return Materials Authorization for an NFX250
Device
163Copyright © 2017, Juniper Networks, Inc.
Chapter 10: Unpacking the Switch
To Next Page
Loading...
Need help?
General
