Juniper EX4300

NOTE:
The following switch models ship with one power supply (AC or DC) and two
fan modules preinstalled:
•
EX4300-24T
•
EX4300-24P
•
EX4300-32F
•
EX4300-32F-DC
•
EX4300-48T
•
EX4300-48T-AFI
•
EX4300-48P
•
EX4300-48T-DC
•
EX4300-48T-DC-AFI
The following switch models ship without any power supply or fan modules
preinstalled:
•
EX4300-24T-S
•
EX4300-24P-S
•
EX4300-48T-S
•
EX4300-48P-S
Uplink modules and transceivers are not part of the shipping configuration.
If you want to purchase any of these components, power supplies, or fan
modules for your switch, you must order them separately.
NOTE: If you have a Juniper J-Care service contract, register any addition,
change, or upgrade of hardware components at
https://www.juniper.net/customers/support/tools/updateinstallbase/ . Failure
to do so can result in significant delays if you need replacement parts. This
note does not apply if you replace existing components with the same type
of component.
Related
Documentation
Installing and Removing EX4300 Switch Hardware Components on page 176•
LCD Panel in EX4300 Switches
The LCD panel on the front panel of the EX4300 switch shows two lines of text, each
with a maximum of 16 characters. The LCD panel displays a variety of information about
27Copyright © 2017, Juniper Networks, Inc.
Chapter 2: Chassis Components and Descriptions