Juniper EX4300 - Page 150

Table 71: Optical Interface Support for SFP+ Transceivers (continued)
ValueSpecification
Ethernet
Standard
EX-SFP-10GE-ZRModel number10GBASE-ZR
10 GbpsRate
LCConnector type
DualFiber count
1550 nmTransmitter wavelength
0 dBmMinimum launch power
5 dBmMaximum launch power
–24 dBmReceiver sensitivity
–8 dBmMaximum input power
SMFFiber type
9/125 µmCore/Cladding size
–Modal bandwidth
80 km (49.7 miles)Distance
AvailableDOM support
YesVirtual Chassis port
(VCP)-configurable
•
EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI,
EX4300-48P, EX4300-48T-DC, and EX4300-48T-DC-AFI
switches—Junos OS for EX Series switches, Release 13.2X50-D10 or
later
•
EX4300-32F switches—Junos OS for EX Series switches, Release
13.2X51-D15 or later
•
EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and
EX4300-48P-S switches—Junos OS for EX Series switches, Release
13.2X51-D26 or later
Software required
Copyright © 2017, Juniper Networks, Inc.128
EX4300 Switch Hardware Guide