Juniper EX4300

Table 10: CLI Equivalents of Terms Used in the Documentation for EX4300 Switches (continued)
Additional InformationItem In DocumentationValueDescription (CLI)
Hardware
Item (CLI)
Understanding Interface
Naming Conventions on EX
Series Switches
n is a value in the range 0
through 9.
Abbreviated name of
the Flexible PIC
Concentrator (FPC)
One of the following:
•
EX4300-24T
•
EX4300-24P
•
EX4300-32F
•
EX4300-48T
•
EX4300-48P
FPC (n)
In this case, FPC refers to
the switch itself.
On a standalone switch,
the default value is 0.
In this case, the FPC
number refers to the
member ID assigned to
the switch.
On a Virtual Chassis
configuration, the values
correspond to the
assigned member IDs of
switches in the Virtual
Chassis.
21Copyright © 2017, Juniper Networks, Inc.
Chapter 1: System Overview