Model 831 Manual Certification 8-17
Available values of Certification Interval are as follows:
• 1 Year
• 2 Years
• 3 Years
• 4 Years
•Never
The default value is Never
Available values of Certification Reminder are as follows:
• 15 Days
• 30 Days
• 45 Days
• 60 Days
•Never
The default value is Never
Notification
When appropriate, the message “Certification will expire in
xx days” or “Certification has expired” will be displayed as
follows:
• When the instrument powers up
• When the Calibrate Tool is selected, as shown in
FIGURE 8-1.
These messages will appear as shown in FIGURE 8-16 and
FIGURE 8-17.
FIGURE 8-16 Message: Calibration will expire
FIGURE 8-17 Message: Calibration has expired
To Next Page
Loading...
