Model 831 Manual Powering the Model 831 2-5
Battery Power
The Model 831 is compatible with AA nickel metal hydride
(NiMH), Alkaline or 1.5 Volt Lithium batteries. Energizer,
Duracell and other nationally recognized brands are the
preferred suppliers of alkaline batteries. These will provide
the user with the best battery life estimation. Sanyo,
Energizer and Ray-O-Vac, 2500 mAH, Lithium, AA, NiMH
batteries and their respective fast chargers are also
recommended.
WARNING:Do not mix Alkaline and NiMH batteries.
WARNING:Do not mix batteries from different
manufacturers
WARNING:Replace all four batteries when installing
fresh cells
WARNING:The correct battery type must be specified,
as described in "Battery Type" on page 18-5, based on
the battery type installed. Otherwise, serious damage,
injury or fire can occur when the battery type is set to
NiMH but Alkaline or Lithium batteries are installed
because the internal charger will be enabled. Alkaline or
Lithium batteries must not be charged.
Battery Voltage and Estimated Run Time are displayed on
the Power Control screen and the last page of the Live tab.
The battery icon indicates the state of the battery charge by
the width of the interior shaded portion. Figure 2-6 shows a
fully charged battery and a nearly discharged battery.
FIGURE 2-6 Battery Status Icons
A battery icon is always available in the status bar at the top
of the screen. The battery voltage and the state of the battery
To Next Page
Loading...
