Model 831 Manual Customizing Measurements 15-23
begin making the measurement and automatically stop when
the configured decay count has been reached.
RT-60 Advanced Menu
The advanced menu provides additional options that can be
used to fine tune a measurement.
FIGURE 15-31 RT-60 Advanced Settings: Impulse
Method
Sample Period sets the time interval between samples of the
sound decay curves.
Max Run Time is used to set the post trigger run time. The
maximum value is dependant upon the Sample Period as
indicated by “Max Run Time vs Sample Period” on page 15-
23.
Return to RT-60 Menu
Enter to Select
Sample Period (ms) Max Run Time (s)
20 19
10 18
5 9
2.5 4
Table 15 - 1 Max Run Time vs Sample Period
To Next Page
Loading...
