Model 831 Manual Tab and Setting Displays 3-19
The Communication tabs include the following:
• Status: Display status of Analog and Wireless modems,
RS-232 and USB channels.
• Modem: Setup a dial-up modem
• Wireless: Setup a wireless modem
• RS-232: Setup an RS-232 interface
Calibrate
For a detailed description of the
calibration procedure, see Chapter 8
"Calibration" on page 8-1.
Calibrate is used to verify and adjust the calibration of the
Model 831 prior to a measurement.
Voice Recorder
For a detailed description of the
voice recording feature, see Chapter
10 "Voice Recording" on page 10-1.
A method to allow voice annotation of the data is described
in Chapter 10 "Voice Recording" on page 10-1.
About
For a detailed description of the
About tabs, see Chapter 22 "About"
on page 22-1.
The About tabs provide the user with information specific to
this instrument such as serial number, options, etc. These are
single section tabs.
The About tabs include the following:
• About: shows information such as serial number and
firmware revision
• Standards: lists the standards that the Model 831 meets
• Options: shows the options that are available in this
instrument
• User: user entered instrument identification
To Next Page
Loading...
