LSI Corporation
- 362 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Appendix A: Events and Messages
0x00a2 Information Current capacity of the battery is
below threshold
Logged as part of monitoring the battery status when the
capacity of the battery is below threshold.
0x00a3 Information Current capacity of the battery is
above threshold
Logged as part of monitoring the battery status when the
capacity of the battery is above threshold.
0x00a4 Information Enclosure (SES) discovered on %s Logged when an Enclosure (SES) is discovered for the first
time.
0x00a5 Information Enclosure (SAFTE) discovered on %s Not logged by the firmware.
0x00a6 Critical Enclosure %s communication lost Logged when the communication with an enclosure has
been lost.
0x00a7 Information Enclosure %s communication
restored
Logged when the communication with an enclosure has
been restored
0x00a8 Critical Enclosure %s fan %d failed Logged when an enclosure fan has failed.
0x00a9 Information Enclosure %s fan %d inserted Logged when an enclosure fan has been inserted newly.
0x00aa Critical Enclosure %s fan %d removed Logged when an enclosure fan has been removed.
0x00ab Critical Enclosure %s power supply %d failed Not logged by the firmware.
0x00ac Information Enclosure %s power supply %d
inserted
Logged when power supply has been inserted to an
enclosure.
0x00ad Critical Enclosure %s power supply %d
removed
Logged when power supply has been removed from an
enclosure.
0x00ae Critical Enclosure %s SIM %d failed Logged when the enclosure SIM has failed.
0x00af Information Enclosure %s SIM %d inserted Logged when an enclosure SIM has been inserted.
0x00b0 Critical Enclosure %s SIM %d removed Logged when an enclosure initialization was completed but
later the SIM was removed.
0x00b1 Warning Enclosure %s temperature sensor %d
below warning threshold
Logged when the enclosure services process has detected a
temperature lower than a normal operating temperature or
lower than the value indicated by the LOW WARNING
THRESHOLD field in the Threshold In diagnostic page.
0x00b2 Critical Enclosure %s temperature sensor %d
below error threshold
Logged when the enclosure services process has detected a
temperature lower than a safe operating temperature or
lower than the value indicated by the LOW CRITICAL
THRESHOLD field in the Threshold In diagnostic page.
0x00b3 Warning Enclosure %s temperature sensor %d
above warning threshold
Logged when the enclosure services process has detected a
temperature higher than a normal operating temperature or
higher than the value indicated by the HIGH WARNING
THRESHOLD field in the Threshold In diagnostic page.
0x00b4 Critical Enclosure %s temperature sensor %d
above error threshold
Logged when the enclosure services process has detected a
temperature higher than a safe operating temperature or
higher than the value indicated by the HIGH CRITICAL
THRESHOLD field in the Threshold In diagnostic page.
0x00b5 Critical Enclosure %s shutdown Logged when an unrecoverable condition is detected in the
enclosure.
0x00b6 Warning Enclosure %s not supported; too
many enclosures connected to port
Logged when the maximum allowed enclosures per port is
exceeded.
0x00b7 Critical Enclosure %s firmware mismatch Logged when two ESMs have different firmware versions.
0x00b8 Warning Enclosure %s sensor %d bad Logged when the device is present on the phy, but the status
does not indicate its presence.
0x00b9 Critical Enclosure %s phy %d bad Logged when the status indicates a device presence, but
there is no corresponding SAS address is associated with the
device.
Number
Severity
Level
Event Text Generic Conditions when Each Event Occurs
To Next Page
Loading...
