Lenovo ThinkServer RD650 - Page 380

LSI Corporation
- 380 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Appendix B: 3ware CLI Commands to StorCLI Command Conversion
Virtual Drive Commands
Show the virtual drive properties. /cx/ux show autoverify
/cx/ux show identify
/cx/ux show ignoreECC
/cx/ux show initializestatus
/cx/ux show name
/cx/ux show parit
/cx/ux show qpolicy
/cx/ux show rapidrecovery
/cx/ux show rdcache
/cx/ux show rebuildstatus
/cx/ux show serial
/cx/ux show status
/cx/ux show storsave
/cx/ux show verifystatus
/cx/ux show volumes
/cx/ux show wrcache
/cx/vx show all
NOTE The StorCLI does not have commands to
show individual virtual drive properties.
Set virtual drive properties. /cx/ux set autoverify=on|off
/cx/ux set cache=on|off [quiet]
/c
x/ux set identify=on|off
/cx/ux set ignoreECC=on|off
/cx/ux set name=string
/cx/ux set qpolicy=on|off
/cx/ux set
rapidrecovery=all|rebuild|disable
/cx/ux set
rdcache=basic|intelligent|off
/cx/ux set
storsave=protect|balance|perform
[quiet]
/cx/ux set wrcache=on|off [quiet]
/cx/vx set
accesspolicy=<rw|ro|blocked|
rmvblkd>
/cx/vx set iopolicy=<cached|direct>
/cx/vx set name=<namestring>
/cx/vx set pdcache=<on|off|default>
/cx/vx set rdcache=<ra|nora|adra>
/cx/vx set security=<on|off>
/cx/vx|vall set ssdcaching=<on|off>
/cx/vx set wrcache=<wt|wb|awb>
Show cache and access policies of the
virtual drive.
/cx/ux show [all]
/cx/ux show autoverify
/cx
/ux show cache
/cx/ux show identify
/cx/ux show ignoreECC
/cx/ux show name
/cx/ux show parit
/cx/ux show qpolicy
/cx/ux show rapidrecovery
/cx/ux show rdcache
/cx/ux show rebuildstatus
/cx/ux show serial
/cx/ux show status intializestatus
/cx/ux show storsave
/cx/ux show verify status
/cx/ux show volumes
/cx/ux show wrcache
/cx/vx show all
NOTE The StorCLI does not have commands to
show individual virtual drive properties.
Description 3Ware CLI Command StorCLI Command