Lenovo ThinkServer RD650 - Page 390

LSI Corporation
- 390 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Appendix C: MegaCLI Commands to StorCLI Command Conversion
Battery Commands
Set battery properties MegaCli -AdpBbuCmd
-SetBbuProperties -f <fileName>
-aN|-a0,1,2|-aALL
storcli /cx/bbu set
learnDelayInterval=<value>
storcli /cx/bbu set bbuMode=<value>
storcli /cx/bbu set autolearnmode=<value>
where x= 0 – Enabled, 1 – Disabled, 2 – Warn though
event.
Start battery learn cycle. MegaCli -AdpBbuCmd -BbuLearn
-aN|-a0,1,2|-aALL
storcli /cx/bbu start learn
Set the battery to low power
storage mode.
MegaCli -AdpBbuCmd -BbuMfgSleep
-aN|-a0,1,2|-aALL
storcli /cx/bbu set powermode=sleep
Seal the gas gauge EEPROM
write access
MegaCli -AdpBbuCmd -BbuMfgSeal
-aN|-a0,1,2|-aALL
storcli /cx/bbu set writeaccess=sealed
Description MegaCLI Command StorCLI Command