Lenze 8400 - Page 1101

Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23 1101
15 Parameter reference
15.2 Parameter list
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C01709
C01751
C01752
C01755
C01763
C01764
C01765
Parameter | Name:
C01709 | Energy saving mode: Status
Data type: UNSIGNED_8
Index: 22866
d
= 5952
h
From version 17.00.00 onwards
Display range (min. value | unit | max. value)
0 255
Subcodes Info
C01709/1 Energy saving mode: Status
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C01751 | Service code inverter characteristic
Data type: UNSIGNED_8
Index: 22824
d
= 5928
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01752 | Service par. inverter charact. function
Data type: UNSIGNED_8
Index: 22823
d
= 5927
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01755 | Service par. inverter charact. factor
Data type: INTEGER_16
Index: 22820
d
= 5924
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01763 | Service code -clamp threshold
Data type: INTEGER_16
Index: 22812
d
= 591C
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01764 | Service par. clamp time
Data type: UNSIGNED_8
Index: 22811
d
= 591B
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C01765 | Service code - difference threshold UG
Data type: UNSIGNED_16
Index: 22810
d
= 591A
h
This code is for device-internal use only and must not be written to by the user!