15 Parameter reference
15.2 Parameter list
1116
Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C02249
C02250
C02251
Parameter | Name:
C02249 | LS_WriteParamList: Oscillation damping influence
Data type: UNSIGNED_16
Index: 22326
d
= 5736
h
From version 12.00.00 onwards: Parameter values (1st value ... 4th value) for optional motor data change-over
Setting range (min. value | unit | max. value)
0.00 % 250.00
Subcodes Lenze setting Info
C02249/1 5.00 % LS_WriteParamList
: c234_val1
C02249/2 5.00 % LS_WriteParamList
: c234_val2
C02249/3 5.00 % LS_WriteParamList
: c234_val3
C02249/4 5.00 % LS_WriteParamList
: c234_val4
Read access Write access CINH PLC STOP No transfer COM MOT Scaling factor: 100
Parameter | Name:
C02250 | LS_WriteParamList: Filter time - oscill. damping
Data type: UNSIGNED_8
Index: 22325
d
= 5735
h
From version 12.00.00 onwards: Parameter values (1st value ... 4th value) for optional motor data change-over
Setting range (min. value | unit | max. value)
2 ms 250
Subcodes Lenze setting Info
C02250/1 32 ms LS_WriteParamList
: c235_val1
C02250/2 32 ms LS_WriteParamList
: c235_val2
C02250/3 32 ms LS_WriteParamList
: c235_val3
C02250/4 32 ms LS_WriteParamList
: c235_val4
Read access Write access CINH PLC STOP No transfer COM MOT Scaling factor: 1
Parameter | Name:
C02251 | LS_WriteParamList: Oscillation damping field weakening
Data type: UNSIGNED_8
Index: 22324
d
= 5734
h
From version 12.00.00 onwards: Parameter values (1st value ... 4th value) for optional motor data change-over
Setting range (min. value | unit | max. value)
040
Subcodes Lenze setting Info
C02251/1 14 LS_WriteParamList
: c236_val1
C02251/2 14 LS_WriteParamList
: c236_val2
C02251/3 14 LS_WriteParamList
: c236_val3
C02251/4 14 LS_WriteParamList
: c236_val4
Read access Write access CINH PLC STOP No transfer COM MOT Scaling factor: 1
To Next Page
Loading...
