Lenze 8400 - Page 678

9 Diagnostics & error management
9.9 Error messages of the operating system
678
Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
User error 2 [xx.0981.00000 ... xx.0981.65535]
User error 3 [xx.0982.00000 ... xx.0982.65535]
User error 4 [xx.0983.00000 ... xx.0983.65535]
User error 5 [xx.0984.00000 ... xx.0984.65535]
User error 6 [xx.0985.00000 ... xx.0985.65535]
User error 7 [xx.0986.00000 ... xx.0986.65535]
Response (Lenze setting printed in bold) Setting: C00581/2 ( Adjustable response)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
User error 2 has been tripped via the bSetError2 input of
the LS_SetError_1
system block.
User-defined.
Response (Lenze setting printed in bold) Setting: C00581/3 ( Adjustable response)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
User error 3 has been tripped via the bSetError3 input of
the LS_SetError_1
system block.
User-defined.
Response (Lenze setting printed in bold) Setting: C00581/4 ( Adjustable response)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
User error 4 has been tripped via the bSetError4 input of
the LS_SetError_1
system block.
User-defined.
Response (Lenze setting printed in bold) Setting: C00581/5 ( Adjustable response)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
User error 5 has been tripped via the bSetError1 input of
the LS_SetError_2
system block.
User-defined.
Response (Lenze setting printed in bold) Setting: C00581/6 ( Adjustable response)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
User error 6 has been tripped via the bSetError2 input of
the LS_SetError_2
system block.
User-defined.
Response (Lenze setting printed in bold) Setting: C00581/7 ( Adjustable response)
 0: No Reaction  1: Fault  2: Trouble  3: TroubleQuickStop  4: WarningLocked  5: Warning  6: Information
Cause Remedy
User error 7 has been tripped via the bSetError3 input of
the LS_SetError_2
system block.
User-defined.