Lenze 8400 - Page 861

Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23 861
15 Parameter reference
15.2 Parameter list
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00205
C00206
C00210
C00219
C00220
C00204/6 Serial no.: Safety card
C00204/7 Serial no.: Standard device
C00204/8 Serial no.: Complete device
C00204/9 Reserved
 Read access  Write access  CINH  PLC-STOP  No transfer  COM  MOT Character length: 24
Parameter | Name:
C00204 | Serial number
Data type: VISIBLE_STRING
Index: 24371
d
= 5F33
h
Parameter | Name:
C00205 | Info
Data type: VISIBLE_STRING
Index: 24370
d
= 5F32
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00206 | Production date
Data type: VISIBLE_STRING
Index: 24369
d
= 5F31
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00210 | HW version
Data type: VISIBLE_STRING
Index: 24365
d
= 5F2D
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00219 | Identity
Data type: UNSIGNED_32
Index: 24356
d
= 5F24
h
From version 12.00.00
Display range (min. value | unit | max. value)
0 4294967295
Subcodes Info
C00219/1 CAN manufacturer no.
C00219/2 CAN device type
C00219/3 CAN version
C00219/4 CAN count no.
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00220 | L_NSet_1: Acceleration time - add. setpoint
Data type: UNSIGNED_32
Index: 24355
d
= 5F23
h
The L_NSet_1 FB: Acceleration time for the additional setpoint nNAdd_a
Setting range (min. value | unit | max. value) Lenze setting
0.000 s 999.999 0.000 s
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1000