Lenze 8400 - Page 965

Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23 965
15 Parameter reference
15.2 Parameter list
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00732
C00734
C00735
C00736
C00740
C00741
C00742
C00743
C00744
Parameter | Name:
C00732 | Oscilloscope command
Data type: UNSIGNED_8
Index: 23843
d
= 5D23
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00734 | Oscilloscope trigger channel selection
Data type: UNSIGNED_16
Index: 23841
d
= 5D21
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00735 | Oscilloscope channel source type
Data type: UNSIGNED_8
Index: 23840
d
= 5D20
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00736 | Oscilloscope data type/data width
Data type: UNSIGNED_16
Index: 23839
d
= 5D1F
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00740 | Oscilloscope offset variables
Data type: UNSIGNED_32
Index: 23835
d
= 5D1B
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00741 | Oscilloscope trigger mode
Data type: UNSIGNED_8
Index: 23834
d
= 5D1A
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00742 | Oscilloscope trigger delay
Data type: INTEGER_16
Index: 23833
d
= 5D19
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00743 | Oscilloscope trigger level
Data type: UNSIGNED_32
Index: 23832
d
= 5D18
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00744 | Oscilloscope trigger mask
Data type: UNSIGNED_32
Index: 23831
d
= 5D17
h
This code is for device-internal use only and must not be written to by the user!