Lexmark MX610 - Page 476

Fax server 'To Format' not set up. Contact system
administrator. 101
Fax Station Name not set up. Contact system
administrator. 101
Fax Station Number not set up. Contact system
administrator. 101
Imaging unit low [84.xy] 101
Imaging unit nearly low [84.xy] 101
Imaging unit very low, [x] estimated pages remain
[84.xy] 101
Incompatible tray [x] [59] 101
Incorrect paper size, open [paper source] [34] 102
Insufficient memory for Flash Memory Defragment
operation [37] 102
Insufficient memory to collate job [37] 102
Insufficient memory to support Resource Save feature
[35] 102
Insufficient memory, some Held Jobs were deleted
[37] 102
Insufficient memory, some held jobs will not be
restored [37] 102
Load [paper source] with [custom string] [paper
orientation] 103
Load [paper source] with [custom type name [paper
orientation] 103
Load [paper source] with [paper size] [paper
orientation] 103
Load [paper source] with [paper type] [paper size]
[paper orientation] 103
Load Manual Feeder with [custom string] [paper
orientation] 104
Load Manual Feeder with [custom type name] [paper
orientation] 104
Load Manual Feeder with [paper size] [paper
orientation] 104
Load manual feeder with [paper type] [paper size]
[paper orientation] 104
Maintenance kit low [80.xy] 104
Maintenance kit nearly low [80.xy] 105
Maintenance kit very low, [x] estimated pages remain
[80.xy] 105
Memory full [38] 105
Memory full, cannot print faxes 105
Memory full, cannot send faxes 105
Network [x] software error [54] 105
No analog phone line connected to modem, fax is
disabled. 105
Non‑Lexmark [supply type], see User’s Guide
[33.xy] 106
Not enough free space in flash memory for resources
[52] 106
Paper changes needed 106
Parallel port [x] disabled [56] 106
Printer had to restart. Last job may be
incomplete. 107
Reinstall missing or unresponsive cartridge
[31.xy] 108
Reinstall missing or unresponsive imaging unit
[31.xy] 108
Remove defective disk [61] 107
Remove paper from standard output bin 107
Replace all originals if restarting job. 107
Replace cartridge, 0 estimated pages remain
[88.xy] 107
Replace defective imaging unit [31.xy] 107
Replace imaging unit, 0 estimated pages remain
[84.xy] 107
Replace maintenance kit, 0 estimated pages remain
[80.xy] 107
Replace unsupported cartridge [32.xy] 108
Replace unsupported imaging unit [32.xy] 108
Restore held jobs? 108
Scanner automatic feeder cover open 108
Scanner disabled by admin [840.01] 109
Scanner disabled. Contact system administrator if
problem persists. [840.02] 109
Scanner jam, remove all originals from the scanner
[2yy.xx] 109
Scanner jam, remove jammed originals from the
scanner [2yy.xx] 109
Serial port [x] disabled [56] 109
SMTP server not set up. Contact system
administrator. 109
Some held jobs were not restored 109
Standard network software error [54] 109
Standard USB port disabled [56] 110
Supply needed to complete job 110
Too many flash options installed [58] 110
Too many trays attached [58] 110
Unformatted flash detected [53] 110
Unsupported disk 110
Unsupported option in slot [x] [55] 111
Unsupported USB hub, please remove 100
USB port [x] disabled [56] 111
Weblink server not set up. Contact system
administrator. 111
printer setup
defaults 191
edge to edge 192
permanent page count 192
printed page count 192
printhead adjustment 328
7016
Index
476