LS Industrial Systems XGT Series - Origin Detection by Upper;Lower Limit

Chapter 9 Functions
9-7
9.1.7 Origin Detection by Upper/Lower Limit (4: Upper/Lower Limit)
This is the homing method using the external input upper/lower limit signal and is used when not using the
origin or DOG signal.
(1) Operation
(a) It accelerates to the setting homing direction and acts by homing high speed.
(b) In this case, if High/Low limit signal is entered, it transferred to opposite direction and acts by homing low
speed.
(c) If encounters the origin signals while the homing low speed is active, the origin would be determined and it
stops.
■ Operating Pattern