LS Industrial Systems XGT Series - The Name of each Part

Chapter 2 Specifications
2-8
2.4 The Name of Each Part
2.4.1 The name of each part
No. Name Description
①
Operating indication
LED
1. RUN : indicates whether power is supplied or not
2. X-AXIS, Y-AXIS
▶ On :
during corresponding axis operation
▶ Off :
when the corresponding axis stops
▶ Blink :
error of the corresponding axis(LED of axis has error would be
blinking)
②
External wiring
connector
Drive device, machinery input, Connector to encoder
③
Dip switch for O/S
mode
Dip switch for setting O/S download mode/operating mode
: O/S download mode
: operating mode
Remark
1. In case dip switch is set as O/S download mode, positioning module doesn’t operate. Make sure to set
dip switch as off except for O/S download.
①
②
ON
OFF
ON
OFF
③