LS Industrial Systems XGT Series - Menus and Functions of Positioning Monitoring; Monitoring and Command

Chapter 10 Positioning Monitoring Package
10-3
10.2 Menus and Functions of Positioning Monitoring
The following is the function and use of the menus of the XGB monitoring package.
10.2.1 Monitoring and Command
• The positioning monitoring package consists of the command window for positioning test operation, teaching
command window and positioning monitoring window as shown above.
• If you click on the ‘Start Monitor’ button at the left bottom of the package, the monitoring and command function is
activated to make various commands and current status monitoring functions available.
• If you start the command on the left, the corresponding functions are activated without the program and the status is
displayed on the monitoring window on the right.