Manitowoc GROVE GMK4090 - Page 375

Operating elements for crane operation
9.1 Overview of the operating elements
Operating manual 3 302 736 en 9 - 3
GMK4090
xx.xx.xxxx
s
1 – Camera on main boom
1)
– Camera on the hoists
1)
– Camera on the driver's cab
1)
à p. 12 - 154
à p. 12 - 157
à p. 12 - 157
2 – Lifting limit switch – function
– Installing/removing the lifting limit switch
à p. 11 - 81
à p. 12 - 141
3 Anemometer and air traffic control light
1)
à p. 12 - 147
4 Using the slewable spotlights
1)
à p. 11 - 128
5 Socket for hand-held control
à p. 9 - 82
6 – Hydraulic emergency operation with the hand
pump
– Hydraulic emergency operation as per BGR 159
1)
à p. 14 - 49
à p. 14 - 56
7 – Switching on boom pre-tensioning
1)
– Switching off boom pre-tensioning
1)
à p. 6 - 14
à p. 12 - 21
8 – Switching on the boom floating position
1)
– Switching off the boom floating position
1)
à p. 6 - 13
à p. 12 - 19
9 RCL override – Version A
3)
– Key-operated switch for overriding the RCL in an
emergency
RCL override – Version B
3)
– No function
à p. 9 - 141
à p. 9 - 142
10 Spotlights I
1)
à p. 9 - 8
11
RCL status display à p. 11 - 61
12 Spotlights II
1)
à p. 9 - 8
13 Lowering limit switch
à p. 11 - 83
14 Counterweight
à p. 12 - 71
15 Outriggers
–Operation
– Lighting
– Installing/removing the outrigger beams
à p. 12 - 41
à p. 12 - 45
à p. 6 - 15
16 Storage compartment
– Anemometer
– Hand-held control
à p. 12 - 147
à p. 12 - 23
17 Shut-off valves at the hydraulic tank
à p. 10 - 4
18 Crane cab
à p. 9 - 6
19 Step at the crane cab Switching on/off
à p. 12 - 159
1)
Additional equipment
2)
à Maintenance manual
3)
Version A or version B active depending on RCL programming