Page 115 of 237
Version: 5.1.6 – June 4
th
, 2018
17. Network
Network – LAN
LAN configuration allows you to configure the router IP address (LAN address) and subnet mask.
This is the IP address used for accessing the router from the LAN.
To set up the LAN interface, click on the tab.
Enter the router IP address.
Enter the subnet mask of the network into which the router is to be integrated.
To set up specific routes, click on the Routes tab. You can enter both network
routes in CIDR format (x.x.x.0/24) and host routes here.
To Next Page
Loading...
Need help?
General
