MB Connect Line mbNET Series - Network - Modem - Callback

Page 124 of 237
Version: 5.1.6 – June 4
th
, 2019
Network – Modem – Callback
The settings below apply to the call back function. This function triggers Internet dial-in remotely via a telephone or
dial-up connection. It must be set up so that the Internet connection will be established via WAN or modem.
Note that call back does NOT work with UMTS-enabled devices.
Label
Description
Call back enable
Checking this option enables the call back function.
How to
call back
Activate Call Back via Phone:
With this setting, the mbNET will connect to the Internet if called from a phone. To es-
tablish a connection, the mbNET must be alerted by four rings. After this happens, the
mbNET hangs up and then starts Internet dial-in. This can take 30-40 seconds.
Log in and press a button:
With this setting, the mbNET will connect to the Internet if you have set up a dial-up
connection with the mbNET and you click on the Call Back button in the System – Info
menu of the user interface. After 30 seconds, the mbNET will establish an Internet con-
nection unless you close the dial-up connection.