Page 223 of 237
Version: 5.1.6 – June 4
th
, 2018
Status – System
Shows the amount of RAM memory currently being used by the router.
Shows the amount of configuration memory and temporary memory currently being
used.
Shows the usage of the packet filter.
The system information can be used to establish the cause of errors on the router.
If, for example, the ERROR LED on the front is flashing, it may be possible to deter-
mine the cause of the error using the log.
Firmware versions 2.1.0 and higher feature a direct error logging function in the web
interface. This function logs all of the errors until the “clear all error messages”
button is clicked. The most recent error is also displayed on the system infor-
mation page and the wizard’s page. Simply click the last error message to go from
one of these two pages directly to the error memory.
To Next Page
Loading...
Need help?
General
