MB Connect Line mbNET Series - Client Authentication: no or Static Key

Page 185 of 237
Version: 5.1.6 – June 4
th
, 2018
Client authentication: No or static key
With authentication without certificates, only one IP channel can be specified per con-
nection entry (local IP address and peer IP address).
The setting “Local IP address” and “Peer IP address” from the server must be reversed accordingly on the
client.
Tab
Label
Description
Network
Settings
Local IP address
Enter the IP address of the local VPN tunnel end point here, e.g. 10.1.0.2
Peer IP address
Enter the IP address of the peer VPN tunnel end point here, e.g. 10.1.0.1
Local network
Enter your network address in CIDR notation here (192.168.0.0/24).
Peer network
Enter the network address of your peer in CIDR notation here
(192.168.99.0/24).
Do NAT for all out-
going traffic
This option was introduced for compatibility with mdex. It replaces the sender
IP address with the current Internet IP address.