To set the IP address, proceed as follows:
First, select “Start” (1) then Control
Panel from the Windows Start menu
(2) and then click on Network Con-
nections (3). Click on Network Cen-
ter (4) then Change Adapter Settings
(5).
Right-click on Local Area Connec-
tion (6) and select Properties.
In the next window, double-click on
Internet Protocol (TCP/IP)
In the next window, enter the appro-
priate IP address. An appropriate IP
address would be e.g. 192.168.0.2.
Please note:
the Internet IP address must be
192.168.0.X and is not allowed to
be already in use by another net-
work subscriber.
In Subnet mask, enter
255.255.255.0 and in Default gate-
way, enter the router IP address as
shown in the section on Router IP
address.
Where a DNS server is in use, there
is an option to select “Obtain DNS
server address automatically”.
To save and close the settings, click
OK on each of the open windows.
To Next Page
Loading...
Need help?
General
